金山贵宾会

Textile Equipment Contact number:0575-84069126

JGW206 type loose / tight Winder


JGW206 Loose/tight type winding machine is a mechanical and electrical integration of winding device, the machine adopts PLC spindle, independent control of spinning, winding and overfeeding three independent drive motor, process parameters adjustment flexibly and conveniently. This eauipment is suitable for nature fiber such as nylon,polyester etc chemical fiber filament, after overfeeding, it will be packaged to loosen type yarn on cones for dyeing, also it is equipped with hank yarn frame, adding oil device, and also have function.

1、Equipment Overview

JGW206 Loose/tight type winding machine is a mechanical and electrical integration of winding device, the machine adopts PLC spindle, independent control of spinning, winding and overfeeding three independent drive motor, process parameters adjustment flexibly and conveniently.

This eauipment is suitable for nature fiber such as nylon,polyester etc chemical fiber filament, after overfeeding, it will be packaged to loosen type yarn on cones for dyeing, also it is equipped with hank yarn frame, adding oil device, and also have function.


2、FOR EXAMPLE:

75D/24Fpolyester DTY, 52spindle,700m/min, 24hours

output: 

power: about 170W/spindle, 

 

3、PARTS INTRODCUTION

1 OILING PART( AUTOMATIC OIL GROOVE FOR OIL BALANCE ADJUSTING)

1566203210186202.jpg

Adopting separated oil groove for each spindle, make sure every oil roller will be the same flat of oil and the yarn will get oil without difference.

 

 2)Gate oxide tension control part

 Using hig flexibility of adjustable tension control part, which gate bars tension with porcelain pure polishing, even in 1200m/min won’t appear powder etc. It can effectively reduce the damage to the fiber while stabilizing the yarn tension.

1566203210567510.jpg

     Gate tensor

 

3)Super feed roller components

The unique craftsmanship of large diameter roller has hard light skeleton through the chromium plating surface polishing, it makes roller more durable and more stable, consumption decrease 50% above than extensive use of hard aluminum plasma spraying roller.

1566203210903343.jpg

   Super feeding roller

  

4)Yarn path

The feeding layout of the yarn in the near straight line effectively controls the increase of the extra tension during the yarn transmission, and ensures the positive and stable supply of the raw material.

 1566203210540487.jpg

      纱路

 

4、Single section site layout

1566203210639754.jpg

TYPE

SINGLE SPINDLE INDEPENDENT DRIVER

spindles

4spindle/section ( maximum 64spindles/set)

Dimension (L X W X H)


1750×814×1900

Power

320w/spindle,500m/min.the power is 170w

Taking up speed

loose type (700m/min)

tight type800m/min


Take-up bobbin (mm)

loose type 230×φ56 inch dyeing bobbin   

6 inch dyeing bobbin 170×φ56

tight type taper bobbin 3°30’ 170×φ71

Take-up diameter (max)

210mm


Take-up gradient angle

65°~90°

spindle pitch

410mm

Adapt to yarn specifications

33~666分特(Dtex

Guide yarn type

Through cylinder driving guide wire hook godet

Output by 24hours



Recommend to you
kok体育手机登录ballbet贝博官网金山贵宾会官网必威体育娱乐betway